NEOPRO 10000 as a replacement mattress. An ALTERNATING pressure relief system continuously and sequentially inflates and deflates air cells to maintain an interface pressure consistently below 32mmHg while sti-mulating blood circulation. NeoPro 10000 incorporates the advanced STATIC and AUTOFIRM features for the convenience of performing routine duties: these functions allow the caretaker to suspend the alternating mode of the mattress and change it into a regular air mattress with pressure adjusting capability. The mattress also incorporates the SEAT INFLATE function: when the patient sits up, his/her weight is distributed on a smaller surface. Thanks to the SEAT INFLATE feature, pressure inside the mattress rises by about 20%, thus supporting the change of position. The pump is equipped with a large filter that filters out bacteria and allows only the clean air to flow into the pump unit. This substantially increases the life expectancy of the pump. NeoPro 10000 is also provided with an audible and visual alarm to warn caretakers and patients when the inner pressure of the cells is too low. The audible alarm can be muted. Quick connectors allow to easily and quickly connect and disconnect the air hoses between mattress and pump. The tubes are "spring-loaded" to help prevent kinks or unwanted bendings. This helps the pump supply the best airflow to the mattress. Tubes come with a vinyl cover to prevent any unwanted dust and dirt. The bottom of the mattress is equipped with slip-resistant mats to avoid any movement. The mattress is supplied with a CPR (Cardio Pulmonary Resuscitation) valve designed for a quick release of air from the cells when there is an emergency need to perform CPR on the patient. The cells are manufactured with the patented "cell-in-cell" design that can provide additional support in case of power failure, when the pump is unable to supply air pressure to the cells. The mattress comes with a convenient waterproof, water-permeable cover fixed by means of a "zipper-all-around" that encloses the mattress cells properly, ensures sanitation and provides a better upkeep of the mattress. 9 of the 20 cells are equipped with low air loss holes which provide good ven-tilation and keep the users dry from unwanted humidity building-up between the body and the mattress. The panel lock prevents persons other than caretakers from changing the settings. The cells in the upper part of the mattress are designed to simulate the softness and stability of a regular mattress. This enables the patient to rest with the comfort of a cushion. The pump can be hung to the end of the bed by means of two hooks.

TECHNICAL FEATURES OF THE PUMP
Feeding: 110V/60Hz; 230V/50Hz - Feeding cable: 3m - Pressure range: 6 adjustable levels - Air
output: >20l/mn - Cycle time: 5, 10, 15, 20mn (adjustable) - Micro processor: with built-in semi-conductor
pressure sensors - Dimensions: 37x27x13cm - Weight: 5kg - Low-pressure visual and
audible alarm - CPC connectors
TECHNICAL FEATURES OF THE MATTRESS
Dimensions: 200x90x25,4cm - Weight: 10kg - Cover, cell and base material: Nylon + PU - Cell
height: 25,4cm - Number of cells: 20 - Number of cells with holes: 9 - CPR valve - Weight sup-port:
200kg